3M™ Platinum™ Plus for DMS is a body repair material for use as part of the 3M™ dynamic mixing system. When used with the 3M™ dynamic mixing system, this 2-component filler significantly reduces the occurrence of pinholes while also mixing to a perfect ratio. 3M™ Platinum™ Plus filler provides excellent adhesion, including to challenging substrates such as galvanized steel and aluminum. This auto body filler has been formulated with an adhesion promoter that works with E-coat, fiberglass, SMC, cured epoxy and urethane primers. Made for the 3M™ dynamic mixing system, it offers exceptionally simple application. Our creamy filler spreads quickly, easily and smoothly. It is vacuum processed to be pinhole free. This 2-component filler is used to repair dents, dings, gouges and other cosmetic imperfections. Our filler repairs these blemishes with the added convenience of being stain free and tack free. Fast curing properties allow for sanding in approximately 15 to 20 min. The secret to a better finish with the 3M™ dynamic mixing system lies in the vortex like action in the mixing nozzle. By mixing 2-component products directly in the nozzle, the applicator quickly delivers the perfect ratio of product. Within this sealed environment, no air is allowed to enter when the filler or glaze and hardener are mixed. The 3M™ dynamic mixing system increases job productivity while ensuring the body repair quality you've come to expect. This filler offers a working time of 3 to 5 min and may be applied in a wide temperature range of 45 to 110 °F (7 to 43 °C). Drying time is 15 min at a temperature of 77 °F (25 °C). 3M™ 7000001498, 2-Component 2-Part Lightweight, Series: Platinum™ Plus, 1 gal Container, Can Container, Part A: Viscous/Part B: Paste Form, Part A: Gold/Part B: Blue, Part A: 144000 to 168000 cPs/Part B: 70000 to 150000 cPs Viscosity, Chemical Composition: Part A: Polyester Polymer, Thickening Agent, Chlorite (Mineral), Polyamide, Poly Oxypropylene Diamine, Treated Wax, Styrene Monomer, Proprietary Polyester Resin, Talc, Inert Filler, Magnesium Carbonate, Limestone, Titanium Dioxide, Zinc Phosphate, Quartz Silica/Part B: Benzoyl Peroxide, Water, Benzoic Acid, C9-11-Branched Alkyl Esters, Zinc Stearate, Oxirane, Polymer with Methyloxirane, Monobutyl Ether, Calcium Sulfate, Iron Oxide (FE2O3), Ferric Ferrocyanide, Ferric Ammonium Ferrocyanide, -20 to 180 °F, Part A: 234 g/L VOC, Part A: Pungent Styrene/Part B: Slight Ester Odor/Scent