![Conventional QD Sheave, A/B Section, 10-Groove, 9.400 Inch Outside Diameter, 9.000 Inch Pitch Diameter, J Bushing, Cast Iron](https://amazeassets.bluemeteor.com/amaze-digital-asset/prod/IBT/42b34ebd-4767-4313-a910-5cfe7660a331.jpg)
10 C 90 J
Conventional QD Sheave, A/B Section, 10-Groove, 9.400 Inch Outside Diameter, 9.000 Inch Pitch Diameter, J Bushing, Cast Iron
Factory Order
MFG #10 C 90 J
IBT #00568026036
- Bore Diameter: 1-1/2 to 3-3/4 InchBore Type: QD® BushedBushing Type: JFace Width: 10-3/8 InchMaterial: Gray Cast IronNumber of Grooves: 10Outside Diameter: 9.4 InchOverall Length: 10.38 InchPitch Diameter: 9 InchSuitable For Use With: C-Cross Section V-BeltsType: Solid Type A-1Width: 9.4
- Conventional (wide/classical) sheaves are manufactured from class 30 gray iron (30000 tensile strength) and can have a maximum speed of 6500 fpm. All Martin sheaves are statically balanced. Dynamic balancing should be considered for any sheaves exceeding 5000 fpm or if they will be used on equipment where vibration is a problem. Martin has extensive inventories of both QD and TB style V-belt sheaves to accept "A", "B", "C" and "D" belts. Martin Conventional Stock Sheave, Solid Type A-1, QD® Bushed Bore, 1-1/2 to 3-3/4 in Bore, 9.4 in OD, 9 in Pitch Diameter, 10 Grooves, 10-3/8 in Face Width, J Bushing, 10.38 in Overall Length, For Use With: C-Cross Section V-Belts, Gray Cast Iron
Martin Sprocket & Gear 10 C 90 JConventional QD Sheave, A/B Section, 10-Groove, 9.400 Inch Outside Diameter, 9.000 Inch Pitch Diameter, J Bushing, Cast Iron
IBT #00568026036
MFG #10 C 90 J