H1607
Helical Gear Worm, Spiral Tooth, 5/8 in Bore, 1.17 in OD, 4 Threads, 12 Diametral Pitch, 1 in Pitch Diameter, 1-1/8 in Face Width, 18 deg 26 min Lead Angle, Right Hand Direction of Rotation, 1-1/8 in Overall Length, 14.5 deg Pressure Angle, Steel
Factory Order
MFG #H1607
IBT #00190003410
Industy Part #30217370
- Bore Diameter: 5/8 InchDiametral Pitch: 12Direction of Rotation: Right HandFace Width: 1-1/8 InchLead Angle: 18 deg 26 minMaterial: SteelNumber of Threads: 4Outside Diameter: 1.17 InchOverall Length: 1-1/8 InchPitch Diameter: 1 InchPressure Angle: 14.5 degType: Spiral Tooth
- When used with worm gears, Boston Gear® worms provide an effective answer for power transmission applications requiring high ratio speed reduction in a limited space using right angle (90 deg), non-intersecting shafts. Manufactured from acetal, nylon and hardened and unhardened steel, they offer the smoothest, quietest form of gearing when properly applied. Because the efficiency of a worm gear drive depends on the lead angle and number of starts on the worm, it's important to keep the ratio as low as possible. It is equally important that worms and worm gears used together must have the same diametrical pitch and threads. Boston Gear® Helical Gear Worm, Spiral Tooth, 5/8 in Bore, 1.17 in OD, 4 Threads, 12 Diametral Pitch, 1 in Pitch Diameter, 1-1/8 in Face Width, 18 deg 26 min Lead Angle, Right Hand Direction of Rotation, 1-1/8 in Overall Length, 14.5 deg Pressure Angle, Steel
- WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects and/or reproductive hazards. For more information go to www.P65Warnings.ca.gov
Boston Gear H1607Helical Gear Worm, Spiral Tooth, 5/8 in Bore, 1.17 in OD, 4 Threads, 12 Diametral Pitch, 1 in Pitch Diameter, 1-1/8 in Face Width, 18 deg 26 min Lead Angle, Right Hand Direction of Rotation, 1-1/8 in Overall Length, 14.5 deg Pressure Angle, Steel
IBT #00190003410
MFG #H1607
Industy Part #30217370